;*********************************************************************************
;	gpspeed-test-led	GpSpeed test LED's
;				Louse@RotaryRacer
;*********************************************************************************
;
; This is a simple test of the boards LED. It should flash.
;
; GpSpeed pins are:
;	B.1	LED
;	C.2	Motor PWM
;	C.1	Fan PWM
;	A.0	Analogue Input 0, I0, throttle
;	A.1	Analogue Input 1, I1, misc
;	A.2	Analogue Input 2, Votage measurement
;	A.3	Analogue Input 3, Current measurement (Hall effect)
;	B.4	Analogue/Digital Input, I2
;
;	B.2	Analogue Input 8, Current measurement (Raw)
;	B.0	Error, error from Motor PWM
;	C.3	I2C Clk
;	C.4	I2c DAT
;	C.0	User 0, I2c Int
;	B.3	User 1
;	C.6	SER1 TX
;	C.7	SER1 RX
;
flash:
	high B.1		; Turns LED on
	pause 500		; Delays for 500ms
	low B.1			; Turns LED off
	pause 500		; Delays for 500ms
	goto flash