Program
|
Description
|
gpspeed-test-led.bas
|
The simplest example which will
flash the boards LED
|
gpspeed-test-motor.bas
|
This is a simple test of the
motor control. It switches the motor on and off.
|
gpspeed-test-motor-pwm.bas
|
This demonstrates the PWM (Pulse
width modulation) control of a motors speed. This uses the PWM hardware
module built into the PicAxe chip.
|
gpspeed-test-fan-pwm.bas
|
This demonstrates the PWM (Pulse
width modulation) control of a fans
speed. This uses the PWM hardware module built into the PicAxe chip. |
gpspeed-test-display.bas
|
This shows how to display text
onto a simple two line LCD display over the GpSpeed's I2C display
interface. It uses a PicAxe LCD
Serial Module AXE033. This needs to be configured as an I2C
interface and connected to the GpSpeeds display port.
|
gpspeed-test-test-ser1.bas
|
This send a sequence of 'A'
characters over the GpSpeeds serial port. It uses the hardware UART
module of the PicAxe. This port can be used for telemetry, GPS etc.
|
gpspeed-test-test-print.bas
|
This
shows how to print debug
messages onto the connected PC's screen. This text will be displayed in
the PicAxe programming editors Terminal window which can be enabled
from the "PicAxe" menu set to: baud 4800, 8 data, no parity. See the
documentation on the PicAxe basic sertxd function for more
information. |
gpspeed-test-temperature.bas
|
This shows how to measure temperature using a TMP37 or TMP36 device. It will display text
onto a simple two line LCD display over the GpSpeed's I2C display
interface and over the serial port to the PC. It uses a PicAxe LCD
Serial Module AXE033. This needs to be configured as an I2C
interface and connected to the GpSpeeds display port. |
gpspeed-test-rtc.bas
|
This shows how to access a
DS1307 real-time clock chip. This can be one optionaly fitter to the
PicAxe AXE033 LCD display module. It will display text
onto a simple two line LCD display over the GpSpeed's I2C display
interface and over the serial port to the PC. It uses a PicAxe LCD
Serial Module AXE033. This needs to be configured as an I2C
interface and connected to the GpSpeeds display port. |
|
|
|
|
gpspeed-demo-0v1.bas
|
This is a demonstration
example. It perfoms the function of a simple speed controller with soft
start and current limiting. It reads data from a temperature sensor and displays a set of parameters onto a LCD
display.
|
gpspeed-run-0v1.bas
|
This
is the initial GpSpeed running program. It perfoms the function of a
simple speed controller with soft start and current limiting. |
|
|
gpspeed-template.bas
|
A template program to start off your own programs
|
gpspeed-software.zip
|
All the above programs in one
zip file.
|