| Qty |
Cost |
Total |
Have |
Description |
| 4 |
£16.68 |
£66.72 |
y |
Main frame Aluminum tube 5m x 25mm x 1.6mm ?? 3 lengths ordered £41.40 also been offered off cuts if available |
| 1 |
£21.28 |
£21.28 |
|
Rollbar and steering bar aluminum tube 5m x 25mm x 2.0mm ?? |
| 60 |
£0.60 |
£36.00 |
y |
Tube Fittings £0.60 per item from GP |
| |
|
|
y |
Steel square box for sub-frame 22x22mm 1.3mm thick |
| |
|
|
y |
Steel round tube for sub-frame 25mm 1.6mm thick |
| |
|
|
y |
Self Tap Screws countersunk 15mm |
| |
|
|
y |
Nuts and Bolts |
| 1 |
|
£20 |
y |
Base and top Plywood 2.5m x 600mm x 4mm Eastmans
|
| 1 |
£18.00 |
|
y |
Internal plywood 5ft x 5ft x 1.6mm Comes as 5ft x 5ft sheets, Use Eastman & Co, Bedminster |
| |
|
|
y |
Side ridged foam (Insulation board with no foil) 2 x 1.5m x 400mm x 100mm and 2 x 1.5m * 400mm * 50mm (or 2.5m x 2m x 50mm and glue bits to make 100mm)
Used Jackodur 2500x600x50mm from Avonside Insulation Supplies (£9.46 a sheet)
|
| 1 |
|
|
y |
Battery base plywood 800mm x 400mm x 10mm ? |
| |
|
|
y |
Boat Coat for internal frame covering |
| |
|
|
y |
Rose joints for Steering Components |
| |
|
|
y |
Aluminium plate (100mm x 50mm x 3mm ?) for steering bar end (furthest from driver) |
| |
|
|
|
Foam for front and rear and rollbar airfoils |
| |
|
|
y |
Hinges for Battery compartment |
| |
|
|
|
Paint (Colour ?) |
| |
|
|
y |
Canvas and foam for seat |
| |
|
|
y |
1m x 8mm steel bar for track rods |
| 2 |
£20.00 |
|
|
Rear Tyres:
Schwalbe Stelvio: http://www.cyclesurgery.com/1026059/Schwalbe-Stelvio-Tyre.html?referrer=froogle.txt&utm_source=google&utm_medium=froogle&utm_campaign=pid1026059
Continental GRAND PRIX 2009 20 x 1/8" http://wazaar.com/cart_productdetails.asp?PRODUCTID=566
Continental Sport Contact 20 x 1.1/8 £19.99, Panaracer Minits Tough 20 x 1.25 £17.99
|
| 2 |
£44.00 |
|
y |
Disk Brakes Avid Ball Bearing 5, http://www.chainreactioncycles.com/ |
| |
|
|
|
|
| 1 |
|
|
y |
48 and 49 tooth rear cog |
| 1 |
|
|
y |
New seat belt (Greenpower) ? |
| 1 |
|
|
y |
100A cutout switch (Greenpower) |
| 1 |
|
|
y |
Battery connection socket |
| |
|
|
y |
Brake cables and ends |
| |
|
|
y |
Wire for horn/brake light etc |
|
1
|
|
|
|
new brake light (Ian) |
| 1 |
|
|
|
new throttle twist mechanism - (inc cable, slider resistor and box) (Use RR7's for now) |
| 1 |
|
|
|
new brake lever (to operate both front brakes in a balanced way) (Use RR7's for now) |
| 2 |
|
|
|
wing mirrors (From RR7 ?) |
| 1 |
|
|
|
battery box (From RR7 ?) |
| 1 |
|
|
|
gauge for setting up the tracking for front steering |
| |
|
|
|
|
| |
|
|
|
FUTURE BITS |
| 8 |
|
|
|
new aerodynamic trims to cover wheel spokes |
| |
|
|
|
new sponsor and decorative stickers for car |
| 1 |
|
|
|
mount for transponder |
| 2 |
|
|
|
Spare 10mm male rose joints |
| |
|
|
|
New wheel bearings |
| |
|
|
|
|
| |
|
|
|
|
